Has anyone else noticed that squad/team leaders for the AI now stay in place at the cycle point area instead of following the patrol route with their teams? I can't pin it down to VCOM but it seems that might be the culprit.

Try this

go to the directory VCOMAI\functions and delete VCOMAI_ClosestAllyWarn.sqf
rename VCOMAI_ClosestAllyWarnOLD.sqf in VCOMAI_ClosestAllyWarn.sqf

that's from the VCOM thread on the BI forums. Hopefully it makes sense

@JD_Wang Try this

that's from the VCOM thread on the BI forums. Hopefully it makes sense

I think that has to do more with the AI not responding to calls for help, though it may play into the waypoint problem. I myself haven't noticed any problems with the calls for help, but I have noticed the waypoint behavior - do they still use this behaviour after using that fix?

I haven't noticed any issues since I did that fix, but to be fair I haven't done any extensive testing.

A really big thing that is a game-breaker while using VCOM is that the OPCOM ignores all of the warning features that come from VCOM (hearing gunshots, vehicles, far off detection) and continues using stupid move and cycle waypoints in the objective. This results in other AI in the objective that aren't involved in combat to just not do anything. The group in combat doesn't use flanking maneuvers or anything, and they never get reinforced like VCOM should allow. Players end up having to seek out the remaining combatants to clear them completely out of the objective, which gets tiring. As virtualized reinforcements come in per the OPCOM's request, the same thing happens, they're just mindlessly stuck to their move waypoint. There is no cooperation, which VCOM should allow.

I'd love to get in touch with him. Any idea how that would happen? And are you suggesting that VCOM is no longer supported/compatible, or something on my mod list is messing it up? Appreciate the reply.

How would I happen to do that? Also, I noticed when using custom objectives, there are units "on reserve", meaning that they don't have any move or cycle waypoints, and can respond to things like seeing units from away or hearing gunshots. Other than that, units that are in the obj. and have cycle and move waypoints don't respond really to anything, I can get close and they won't react to me or my fire. It's odd. No HC is being run.

I haven't touched ARMA for a couple of months now, but just after the new year I think it was I put together to completely vanilla mission on Altis and I struck the issue with VCOM calling in support choppers again. This despite using the same code in my initServer.sqf I always have to disable it.

Has anyone else had this issue, or has something changed?

It was the straw that broke the camel's back for me at the time. Sometimes it gets very weary fighting this game to make it do what you want it to.

All I've ever had to do in the past was use the initServer.sqf with

[
	{
		{
			If (!isNull (driver _x) ) then {
				{
					_x setVariable ["NOAI", true, false];
				} foreach (units group (driver _x));

			};
		} Foreach (vehicles select {_x isKindOf "Helicopter"});
	},
	10,
	[]
] call CBA_fnc_addPerFrameHandler

I actually fired up ARMA for the first time in months and played around with it and couldn't get it to happen again. (and that's part of the reason I don't play much anymore haha)

@AUTigerGrad So heads up folks....VCOM in its current state will ultimately wreck an ALIVE server after the server being up for 8-12 hours. By wreck I mean.... extremely long save times (or no save at all can be done) on server save and exit, extremely long spawn times for ALiVE units causing units to spawn in on top of players after several minutes, etc. I'm assuming this is due to some bad code that causes never ending loops and spam on the server.

A VCOM user named MrLED has uploaded several fixes to VCOM's github but they have not been pushed yet to the main VCOM code. You can grab them off of github and replace the current version.

I'm going to test to see if these new updates fix the VCOM issues. But I figured I'd let folks know who are running servers.

I confirm also. Long time to save. VCOM and ALiVE compatibility looks like a marriage... Moments of peace and moments of fights!

Let's wait for future VCOM updates, it seems Genesis is working hard on the mod and is aware of the FSM Leaks and other bugs in VCOM.

How exactly do you replace the existing vCOM files with the updated ones from the github? my vcom is packed into a pbo, do i need to replace and repack it all or is there a pbo avail?